Manufacturing & Engineering

ISO 9001 for Manufacturing & Engineering

What an ISO 9001 audit examines in a manufacturing or engineering company: process control, inspection, traceability and nonconforming product.

  • ISO 9001
  • IAF 17

Overview

What ISO 9001 certification means for manufacturing organisations

In a manufacturing or engineering company, an ISO 9001 audit is decided on the shop floor. The quality manual and procedures matter at Stage 1, but Stage 2 tests whether parts are made to the current drawing, whether inspection catches what it should, and whether a nonconforming part is identified and kept away from good stock.

Auditors follow product through the operation: a purchase order is traced to the material it bought, that material to the job it went into, the job to its inspection records and the inspection records to the delivery. Where the trail breaks, the audit finds it.

Technical area. Typically IAF 17 (basic metals and fabricated metal products), 18 (machinery and equipment) or 19 (electrical and optical equipment). The code is confirmed from your actual activities at application review, and we decline a scope for which we do not have a competent auditor.

Example scope statements

  • Manufacture of precision machined components to customer drawings
  • Design and manufacture of industrial pumps and spare parts

The scope on your certificate describes exactly what was audited — see scope of certification.

Where audit time goes

What the auditor looks at

The areas that take most of the Stage 2 audit in this sector, and why.

Control of documented information

The drawing revision on the machine matches the revision in the system, and obsolete drawings are withdrawn from use.

Production and inspection

Work instructions, in-process and final inspection, and the records that show each stage was actually carried out.

Calibration and measurement

Gauges and instruments used for acceptance are calibrated, traceable and identified, and suspect results are reviewed when a gauge fails calibration.

Nonconforming output

Rejected parts are tagged, segregated and dispositioned by someone with the authority to do so, and repeat problems lead to corrective action.

Before Stage 2

Findings we see most often in this sector

Each of these is avoidable, and each is a common source of nonconformities at Stage 2.

  • Uncontrolled photocopies of drawings at workstations
  • Measuring instruments without calibration status
  • Rework carried out with no record of re-inspection
  • Customer complaints closed without root-cause analysis

GMSCPL audits and certifies; it does not help organisations implement their systems. See our impartiality policy.

Common questions

ISO 9001 for Manufacturing — questions

ISO 9001 requires calibration of measuring equipment used to verify conformity of products. Instruments used only for indication can be identified as such. The audit checks that the distinction is made and applied.

Only if you genuinely do not design — for example, you build only to customer drawings. If you design products or modify customer designs, clause 8.3 applies.

Question not answered here? Ask a certification specialist — we answer technical questions without requiring an enquiry first.

Next step

Request an ISO 9001 quotation for your manufacturing organisation

Tell us your scope, headcount and sites. We will send a fixed quotation with the audit-day calculation shown.